The manufacturer suggests that protective clothing, eyewear and gloves are worn and that it is to be kept out of the reach of children. If irritation occurs, it is advised that you seek medical advice or attention.

Test the product on an inconspicuous surface, initially, before applying the residue remover to your porcelain paving, working in manageable areas at a time. Jointing compound is made from different ingredients to cement or sand base trowel-in grouts, so removing residues requires a specific solution. LTP Solvex is a high-performance, non-caustic remover designed to soften polymers, making residue easy to remove. To restore your paving, use the following process: Grimex is effective at removing stains such as oil, grease, ingrained dirt, grime and old wax layers from all artificial and natural stone and tiles. Ideal for general stone care and for use in the restoration of artificial and natural tiles and floors. It is especially effective on limestone, slate, porcelain and quarry tiles. LTP Grimex helps remove stubborn stains and existing layers of sealant from floors and tiles. It is also suitable for the general maintenance cleaning of external driveways, patios and paths. Use undiluted and agitate with scrubbing brush or mechanical scrubber if necessary. Neutralise treated surface with clean water after use. OMG ~ I did try the few drops to a gallon but soon resorted to neat with a yard broom to scrub. Four tiles at a time, work GRIMEX into the tiles and wait. Srub with a bit of water, scrub with more water, mop with a lot of water. Rinse and admire the result.

Leave the solution to penetrate the surface. Leave for 1-5 hours depending on the level of soiling.

It's suitable for removing ingrained dirt, grease and grime, and can also be used to clean neglected areas or areas subject to wear and tear. A regular ‘routine’ clean will maintain a hygienic environment and a tile’s aesthetic. Once grease and dirt builds up on a surface, tiles will be more difficult to clean, and they may become slippery. A periodic deep clean in high traffic areas may also be necessary. Often, the same detergent can be used for routine and deep cleaning, with the dilution ratio and method adjusted in each case. This is the case with LTP Grimex – the detergent that we recommend for limestone floor tiles. Grout in the joints or brush in the jointing compound and clean off residues. Always follow the manufacturer’s instructions. It is especially effective on stone, travertine, slate, terracotta, porcelain and quarry tiles. LTP Grimex helps remove stubborn stains and existing layers of sealant from floors and tiles. It is also suitbale for the general maintenance cleaning of external driveways, patios and paths. In mild cases and on absorbent tiles: Dilute one part LTP Grimex in 10 parts warm water. Apply with a cloth or mop. Wipe off thoroughly with a clean damp cloth.The All Stone Xtreme Cleaner boasts a high performance and concentrated high alkaline cleaner and degreaser which ensures a deep clean to grout joints. Also, external porcelain tiles are manufactured to have a slip rating of R12 (or more), which means they are grippier and slip resistant. Internal porcelain tiles, on the other hand, aren’t by default manufactured to such a slip-resistant standard.

To remove cement and grout stains you may find LTP Grout Stain Remover is a more effective alternative. Scrub using a short-haired stiff bristled brush. Rub the surface with a clean lint free-dry cloth to remove the softened films.So, now we know what porcelain slabs are, lets delve into the best ways to clean and care for your paving. We’ve offered care guidance for each stage of your paving installation project.